RF Energy Harvesting System Based on Spiral Logarithmic Dipole Rectenna Array

This paper presents the development, design, simulation and fabrication of a logarithmic spiral antenna array for the electromagnetic energy collection system independent of frequency, compact in microstrip technology, low cost and operating within a range of frequencies. 1 to 4 GHz, are designed using the CST Studio software that allows modeling and simulating essential parameters such as radiation lobes, VSWR, power, gain, parameter S11. From these simulations the printing is done on an RF4 substrate with a thickness of 1.6 mm, a dielectric constant of 4.4 and an input impedance of 50 Ω. The resonator structure antenna with dimensions of 190 × 210 mm. The frequencies obtained with the rectenna matrix, since it offers good performance for electromagnetic energy harvesting applications that operate in standard frequencies such as GSM, WiFi, LTE which are available in the environment and allows us to collect energy. To obtain electrical energy as part of the design of a frequency rectifier which is optimized with the application of the Schottky diode. In addition, its construction of the rectenna matrix was carried out based on the proposed design, then performance tests and validation of the prototype were carried out using the miniVNA Tiny spectrum verifier, and finally energy storage tests were carried out. © 2023, The Author(s), under exclusive license to Springer Nature Switzerland AG.