Varela Aldas, José
Thumbnail Image
Preferred name
Varela Aldas, José
Main Affiliation
Ambato
Email
josevarela@uti.edu.ec
ORCID
Scopus Author ID
57192546163

Research Output

Filters

82
Reset filters

Settings
Now showing 1 - 10 of 82
No Thumbnail Available
Publication

Virtual Environment for the Mashing and Boiling Process in Craft Beer Production

2023 , Pogo S.I. , Granizo J. , Andaluz V.H. , Varela Aldas, José

Process automation allows to increase production and improve the quality of craft products. This paper presents the implementation of closed-loop control algorithms for a mashing and brewing plant of craft beer. The proposed control scheme is implemented through the HIL technique, for which a virtual environment that simulates the behavior of the industrial process and a control card where the control algorithms are implemented are considered. To represent the behavior of the plant level and temperature processes, the mathematical model of each process is obtained, this model is used for the design of the control algo-rhythms, and the plant is modeled in 3D and incorporated into the graphics engine also has effects of realism together with been 3D in order to increase the level of realism to the process. For user interaction with the environment, an HMI type mantle center is incorporated to visualize and control the process manually, semi-automatically, and automatically, in order to test the control algorithms safely and avoid the risk of instrumentation damage or loss of real materials. © 2023, The Author(s), under exclusive license to Springer Nature Singapore Pte Ltd.

View
No Thumbnail Available
Publication

Prototype of a Low Cost Turbine for the Generation of Clean Energy in the Ecuadorian Amazon

2020 , Guáitara B. , Buele, Jorge , Salazar F.W. , Varela Aldas, José

Access to electricity supply in remote areas is limited, despite having wealth of other natural resources such as water. This document presents the design and construction of a scale electric generation system, taking advantage of the hydraulic energy produced by a constant flow of water flow. For this, the turbine design is described, which is based on the principles of Francis and Kaplan. In addition, the structural design made in CAD/CAM software and the actual implementation of the system are shown. To determine the generated electric potential, the electromagnetic analysis is performed based on the Maxwell-Faraday equation and the respective calculations. The validation of this proposal is determined by conducting experimental tests with balanced, unbalanced, series and parallel coils and with their implementation in a home. © 2020, Springer Nature Switzerland AG.

View
No Thumbnail Available
Publication

Plant layout of a blackberry pulp production process

2023 , Teneda E. , Caceres L. , Varela Aldas, José

An adequate plant layout expedites the production process, optimizing time and resources to improve the industrial system's performance. This work presents the plant layout of a blackberry pulp production process using the systematic layout planning (SLP) methodology, which allows for analysis and evaluation and renders all the elements involved in the productive process. This qualitative method allows for locating the internal components of the plant-based on different factors. Tools used include material flow analysis through the from/to chart; the Guerchet methodology makes it possible to determine the total area needed; the space relationship diagram allows fixing the proximity between the elements; finally, three alternatives are established and evaluated for the distribution. According to the scores obtained, the alternative improvement is selected, and the plant layout is virtualized using three different 3D design software that allows rendering of the plant layout. ©2023 IEEE.

View
No Thumbnail Available
Publication

Effects of immersive virtual reality on the heart rate of athlete’s warm-up

2019 , Varela Aldas, José , Palacios-Navarro G. , García-Magariño I. , Fuentes E.M.

An adequate warm-up prior to intensive exercise can bring benefits to athletes, these requirements may vary depending on the physical activity and the training needs. The immersive virtual reality could have benefits in the warm-up and it can be determined by physiological data of the athlete. This work presents a mobile virtual reality application to stimulate the warm-up of an athlete using a standard treadmill, where the developed application is composed of a pleasant and stimulating environment. A Smartphone and the Gear VR are used as an HMD device, and wireless headphones are placed in the users, in addition, the heart rate of the athletes is monitored using a Polar H7 sensor. Experimental results are obtained in athletes with similar characteristics and conditions, identified a direct relation of the virtual environment with the pulsations per minute (ppm), denoting pulsations greater than usual in case of the stimulating environment and lower pulsations for the pleasant environment. Finally, a usability test is performed that shows the level of sociability of the system. © Springer Nature Switzerland AG 2019.

View
No Thumbnail Available
Publication

Control of an Arm-Hand Prosthesis by Mental Commands and Blinking

2020 , Varela Aldas, José , Castillo Salazar, David Ricardo , Borja Galeas, Carlos , Guevara Maldonado, César Byron , Arias Flores, Hugo Patricio , Fierro-Saltos, W. , Rivera, R. , Hidalgo-Guijarro, J. , Yandún-Velasteguí, M.

Patients who lack upper and lower extremities have difficulties in carrying out their daily activities. The new technological advances have allowed the development of robotic applications to support people with disabilities, also, portable electroencephalographic (EEG) sensors are increasingly accessible and allow the development of new proposals which involve the mental control of electronic systems. This work presents the control by mental orders of an arm-hand prosthesis using low-cost devices, the objective is to command the arm using the user’s attention and blinking, where the components are a brain signal sensor, a prosthesis, an Arduino board, six servomotors, and a computer. The developed program in Matlab allows controlling the arm by means of an attention level y blinking. The results show the functioning of the system through experimental tests and a usability test is applied, finally, the conclusions establish adequate coordination in the movements of the prosthesis and the patient indicate satisfaction with the proposal. © Springer Nature Switzerland AG 2020.

View
No Thumbnail Available
Publication

Control of a Security Door Through the Internet of Things

2022 , Toapanta J. , Miranda M. , Andaluz V.H. , Palacios-Navarro G. , Varela Aldas, José

Home security has increased in recent years with the help of technology. Even more, the appearance of the internet of things (IoT) allows it to control and monitor devices from anywhere in the world. This work develops a proposal that alerts the user about the status of a door through a mobile application using low-cost devices. For the electronic design, a magnetic contact sensor has been used that detects if the door is open. An electric lock is also used to control the door with the mobile application from anywhere in the user. The electronic system is based on an ESP32 board that has WiFi communication, this board sends the door status data to the mobile application. The electric lock can be activated in three ways: manually from the door, automatically according to a programmed routine, and remotely using the mobile app. The platform used for the IoT is Firebase, which allows the exchange of information between the local site and the remote site. The tests carried out around the prototype have responded correctly, the installed sensor continuously reports on the status of the door, and the control is executed according to the orders sent through the cloud. In addition, an acceptance test is used that guarantees the correct operation of the proposal. © 2022, The Author(s), under exclusive license to Springer Nature Switzerland AG.

View
No Thumbnail Available
Publication

Prototype System for Control the ScorBot ER-4U Robotic Arm Using Free Tools

2021 , Chávez-Chica E. , Buele J. , Salazar F.W. , Varela Aldas, José

The acquisition of controllers offered by manufacturers represents a high cost for the user and presents limitations for development. Therefore, in this work we propose the development of an electronic controller for the ScorBot ER_4U robotic arm operation. The programs are elaborated in C language, in the ESP-IDF development environment, which allows the manipulation and control of the arm. The development of this research directly benefits the research field. In this way, an open license software is delivered for the modification of codes and circuits that support the evolution of robotics knowledge. The tests carried out validate this proposal, both in operation and in the response times obtained. © 2021, The Author(s), under exclusive license to Springer Nature Switzerland AG.

View
No Thumbnail Available
Publication

Virtual Reality applications based on activities of daily living (ADL) for cognitive diagnosis and rehabilitation

2022 , Buele, Jorge , Varela Aldas, José , Palacios-Navarro G.

Traditionally, screening tools are available to help diagnose a person's cognitive problem. Therefore, rehabilitation techniques are lab exercises that lack adequate ecological validity. In this paper, we propose to establish the projection of a methodology for the development of serious games based on activities of daily living (ADL). Both for real and immersive environments, to assess what provides better results when applied in healthy patients at first, but with a focus on those suffering from Alzheimer's disease. It is expected that when this research is completed, precedents will be established for the development of new proposals based on virtual environments. © 2022 IEEE.

View
No Thumbnail Available
Publication

An analysis of IoT technology education based on UIFLOW

2023 , Varela Aldas, José , Junta-Andagana C. , Bran C.

The importance of education in new technologies today drives us to continue exploring available options to introduce students to STEAM competencies. This article presents an analysis of satisfaction in the practical education of IoT technology using a block-based programming language. In this case, the UIFlow development environment, compatible with M5Stack kits, is utilized. A graphical interface for the M5Stack Core2 AWS module's screen is designed to enable data transmission to the Thingspeak platform via the MQTT protocol with a 1-second delay. This analysis was conducted during a practical session with a group of 11 industrial engineering students. The collected data includes session runtimes and a satisfaction assessment using the Post-Study System Usability Questionnaire, specifically adapted for this case. The results indicate an overall satisfaction level of 84.7% within the group. The lowest-scoring aspect pertains to the information provided by UIFlow for problem-solving. © 2023 IEEE.

View
No Thumbnail Available
Publication

A comparison in the teaching of programming for development kits with IoT

2022 , Varela Aldas, José , Miranda M. , Palacios-Navarro G.

Education 4.0 promotes programming at all training levels, making block programming a compatible alternative, including developing applications with hardware. This paper compares UIFLOW and Arduino IDE in programming the M5Stack Core2 development kit for education. The designed task allows students to read, locally view, send, and remotely view the inertial sensor data integrated into the device. The programming in UIFLOW application uses block programming; this software is for the M5stack kits. To program in C code using Arduino IDE is need to install the necessary libraries for compatibility with M5Stack. Students of computer science engineering implement the program using both programming languages. The compared data are development times and acceptance of the participants. The results show the coding times of the program and the scores obtained in the acceptance test, determining faster times in the case of block programming and a better acceptance rate that demonstrates the advantages of using this language in programming education. © 2022 IEEE.

View